Wash-stand with drawers
Frame/ Bottom panel:
Particleboard, Plastic foil (min. 70% recycled), Plastic foil, Plastic edging (min. 50% recycled), Plastic edging
Top rail:
Fibreboard, Plastic foil (min. 70% recycled), Plastic edging (min. 50% recycled), Plastic edging
Middle rail/ Drawer divider/ Drawer sides/ Drawer back:
Particleboard, Plastic foil, Plastic edging (min. 50% recycled), Plastic edging
Drawer front:
Fibreboard, Plastic foil (min. 70% recycled), Plastic foil, Plastic edging (min. 50% recycled), Plastic edging
Drawer bottom:
Fibreboard, Plastic foil
Water trap w flexible pipe, 1 bowl
Water trap frame/ Cleaning plug/ Cover cap/ Outlet connector:
Polypropylene plastic
Sealing ring/ Gasket/ Seal:
Synthetic rubber
Waste pipe:
Synthetic rubber, Polypropylene plastic
Strainer:
Stainless steel
Seals:
Polyethylene foam
Outlet pipe:
Polypropylene (min. 50% recycled)
Assembly tool:
ABS plastic
Wash-basin mixer tap
Zinc, Metallized
Wash-basin
Cover:
Stainless steel, Stainless steel
Cover cap/ Mechanism:
Acetal plastic
Spring:
Stainless steel
Sealing ring:
Synthetic rubber
Cover cap:
Polycarbonate/ABS plastic
Basematerial:
Polyester/crushed marble, Polyester
Care instructions
Wipe clean with a mild soapy solution.
Wipe dry with a clean cloth.
Wet marks should always be dried off as soon as possible to stop moisture penetration.
Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.